Humidifier Replacement Wick

Humidifier Replacement Wick

Compatible with InvisibleMist™ Humidifier

$8.00 USD$19.99 USD
Humidifier replacement filter
  • App & Wifi connectivity
  • Alerts when you need a new a filter
  • RealTrack Technology®

  • Is this the right filter for you?

    Find the Blueair device name on the label inside your Humidifier

  • Accurate filter lifetime tracking

    Blueair’s proprietary RealTrack algorithm accurately calculates the remaining filter lifetime based on fan speed, usage time and pollution levels.

FAQ

What model is this filter compatible with?

This filter is compatible only with the InvisibleMist™ Humidifier.

What is InvisibleMist™ technology?

Blueair's advanced InvisibleMist™ Technology delivers clean moisture by trapping water impurities in the wick filter, releasing pure water vapor with no mist into the air².

How often do I need to replace the wick filter?

We recommend every 6 months. The filter indicator on the interface of your humidifier and in the Blueair app will notify you when it is time to replace your filter.

How long will the Blueair Humidifier run for?

Your humidifier will deliver up to 48 hours** of clean moisture. Runtime is based on 77°F & 50% RH in night mode. Actual runtime may vary with different room conditions.

Do I have to use filtered water in the Blueair Humidifier?

No you don’t! Thanks to the anti-microbial filter, you can use tap water with confidence as it traps minerals & pollutants.

Why is the low water indicator on my humidifier not turning off even though I have added water to the tank?

If the low water hasn’t turned off after filling the water reservoir, manually adjust the fan speed on the humidifier by pressing the fan speed button on the device or through the app.

This will draw water into the pump and allow the sensor to detect the recently added water. The low water indicator will then turn off, and you can set the fan back to your desired speed or return to Auto mode.

I've replaced my filter, now how do I reset the filter replacement indicator?​

Extra long press the Fan Speed button for about 15 seconds until all the LEDs on the interface light up, then release.

The red filter replacement indicator will blink three times and then disappear.

Reminder: After replacing the filter, it is required to manually conduct a filter reset on the air purifier.